Method of use:
1) matching products: first, please first open the remote control power switch, press the remote control to live vibrate button, and then put on receiver battery, (battery has bonus in factory packaging: remote control: high capacity batteries, 9 V when packing has been installed, receiver is: regular alkaline batteries AAA 1.5 V) on both sides. Please wait for the receiver to start vibrating as well and let it vibrate more than 5 seconds. To loosen the vibrate button remote control. Meanwhile said receiver microcomputer has to accept and save from the remote control signal, the other remote control for it has no effect. If not, please try again. (please when buy operation)
2) please GaiPing receiver battery cover (because involving product waterproof, you must install the battery cover flat), has a thorn in the side outwards, thorn as the conductive adhesive, at the top of the direct contact with the dog's skin. Fixed adjust good nylon ribbon necklace, wear shoulds not be too loose or too tight, elastic should be can plug into two fingers under it.
3) remote control keys function description:
Upper left to put key: this button is direct discharge; Practical in the special case of an emergency (such as your dog to cuts, etc.)
Bottom left for the vibrate button: this button is in your dog screamed out not obedient or use, its vocal cords vibration, which makes it feel uncomfortable, when vibration is invalid for a long time, it will automatically turn to discharge.
The function of the upper right to light button: this button is a more bright white light, when is not convenient to use, or the light compares dark (such as: walk along under the condition of your pet, etc.).
For voice at the lower right button: this button is for your dog, you can follow one's inclinations. Sound and can adjust the size, adjust the switch on the right side below. (such as: out loud twice is on behalf of have a meal, in a low voice in again and again, on behalf of any other meaning, you can set your own training)
Right above for the remote control switch, and all of the above operation must open the switch first.
4) to test whether the discharge method: the product discharge, please don't direct contact with human skin test. We have throw in an LED in the packaging test lamp, will be two light foot fixed on the two discharge thorn, make sure have a good contact, and then press set key, LED lights flashing, said the product is discharge.
The user information
1) although this product have waterproof design, but please try to avoid flooding. So as not to affect the service life of the product. The remote control is not waterproof design, more should be waterproof. And don't fall off, so as not to loose line. Affect product performance.
2) this product is vibration + electric machine stop barking., dog, it is hard to shake the vocal cords, motor and stop the sound, so you must train a lot, when it call you press vibration punishment; When it stop when you can give some food as a reward, but please don't literally buttons to play with your pets. This is is not only inhuman affects the behavior of the training effect. Please be sure to remember!
3) this product remote control of the effective distance of 250 meters, beyond the scope of the interrupt signal, can't work. (250 m for accessibility and no interference of linear distance)
4) don't use this product for a long time, please remove receiver battery, remote control switch to close. It is best to nylon ribbon collar also landed, restore the factory status.
Product
4 in 1 250M Vibrate Electric Shock Remote Control Bark Stop Dog Training Collar |
Number:BST0801001 |
Description
Prev:Underground...
Next:None